HPE Nimble Storage Part I – Final Quiz

Exercise Summary

0 of 10 Questions completed

Questions:

You have already completed the exercise before. Hence you can not start it again.

Exercise is loading…

You must sign in or sign up to start the exercise.

You must first complete the following:

Results

Exercise complete. Results are being recorded.

Results

0 of 10 Questions answered correctly

Your time:

You have reached 0 of 0 point(s), (0)

Current
Review
Answered
Correct
Incorrect

Question 1 of 10

1. Question
Which prerequisite must be fulfilled before starting the array initialization?
- HPE Nimble Linux Toolkit installed on a server
- Ensure your laptop/server IP has a static IP address configured on the same subnet as the array management interface.
- All switch configurations done like flow control and spanning tree.
- Array registered in InfoSight based on the serial number.
- HPE Service Processor deployed
Correct

Incorrect
Question 2 of 10

2. Question
How is SmartReplicate licensed?
- per array
- per target
- based on capacity (per 1TB)
- free of charge
Correct

Incorrect
Question 3 of 10

3. Question
What is the maximum number of banks in an AF- Series array?
- 1
- 2
- 3
- 4
Correct

Incorrect
Question 4 of 10

4. Question
What is a valid QoS performance setting?
- Latency threshold
- IOPS minimum
- IOPS limit
- MB/s minimum
Correct

Incorrect
Question 5 of 10

5. Question
What is primary HPE Nimble SmartReplicate component?
- Partner
- Snapshot copy
- Replication group
- Sync partner
Correct

Incorrect
Question 6 of 10

6. Question
How should the All-Flash shelf be connected to the controller shelf?
- Cable the All-Flash shelf directly to the last disk shelf.
- Use high performance SAS expanders.
- Cable the All-Flash shelf directly to the first disk shelf.
- Cable the All-Flash shelf directly to the controller shelf.
Correct

Incorrect
Question 7 of 10

7. Question
What is the correct power on/off order of the All Flash-Series? (Choose two.)
- Power off the controller shelf first, then the expansion shelves
- Power off the expansion shelves first, then the controller shelf
- Power on expansion shelves first, then the controller shelf
- Power on controller shelf first, then the expansion shelves
Correct

Incorrect
Question 8 of 10

8. Question
How can controller failover be performed? (Choose two.)
- In OCP, press the Failover button.
- Perform it online via InfoSight.
- In CLI, use the command: failover.
- In WebUI, on the array level, click MAKE ACTIVE.
Correct

Incorrect
Question 9 of 10

9. Question
Which kind of licensing approach do HPE Nimble arrays use?
- Capacity-based licensing
- Controller-based licensing
- Frame-based licensing
- All-inclusive licensing
Correct

Incorrect
Question 10 of 10

10. Question
Volume pinning is a technology that applies to which series of HPE Nimble arrays?
- All series
- AF-Series
- CF-Series
- HF-Series
Correct

Incorrect

HPE Nimble Storage Part I – Final Quiz

HPE Nimble Storage Part I – Final Quiz

Exercise Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question